Stockwell Safety

Forum Replies Created

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • in reply to: No Pictures #28181
    Stockwell Safety
    Keymaster

    Hi Jim,
    Just tried that assessment and it’s all working fine from what I can see.
    Try using the link below to find out what browser you’re using:
    https://www.whatsmybrowser.org/

    in reply to: Rusty fittings #24674
    Stockwell Safety
    Keymaster

    Do a risk assessment. Doesn’t sound safe to me by the information you’ve given.

    in reply to: Pool Filling #24349
    Stockwell Safety
    Keymaster
    in reply to: Pool Top-up Pipework #24248
    Stockwell Safety
    Keymaster

    Hi Ben,
    I’ve had a look at the photo you sent and I have to be honest and say I haven’t got a clue what’s going on with it. It certainly doesn’t appear to be a conventional layout.
    Sorry I can’t be more help.

    in reply to: Pool Plant Schematic #24204
    Stockwell Safety
    Keymaster

    You can upload the photos straight into this thread.

    I’m assuming the ceiling space is too high to access?

    in reply to: Pool Plant Schematic #24198
    Stockwell Safety
    Keymaster

    Hi Ben,
    If you could send some photos I’ll take a look.

    After the pump the pipe continues vertically up the wall before disappearing into the wall near the ceiling.

    Do you know what’s on the other side of the wall?

    in reply to: Why are these not being marked #23047
    Stockwell Safety
    Keymaster

    Hi Kevin,
    Thanks for your feedback.
    We’ve reviewed this issue and have now introduced a ‘View Questions’ button that you can click after completing the assessment which will tell you which questions you got correct and incorrect.
    This should help you to focus on which areas of the course content you should revise before re-attempting the assessment.

    in reply to: Water balance base line #22053
    Stockwell Safety
    Keymaster

    Hi Matthew,
    No need to test mains water balance – it’s the pool water we’re concerned with. You’re aiming to keep within +/- 0.5 of zero as it relates to the pool water – the mains water is not tested or relevant to the +/- 0.5 tolerance.

    All corrective actions are contained within the course content. Keep the pH optimised for chlorine effectiveness, adjust calcium hardness and/or total alkalinity if they are outside of 80 – 200, keep the TDS as low as you possibly can.

    in reply to: Course access #17298
    Stockwell Safety
    Keymaster

    In the header of the website, in the top right, click on ‘Your Courses’ and a list of the courses you are enrolled on will be displayed.

Viewing 9 posts - 1 through 9 (of 9 total)